Panasonic KX-TA616 Installation Manual page 113

3 Features
*1: An OGM is sent to the caller.
When the system detects a cyclic tone or CPC signal while the OGM is being sent, the
call is disconnected.
*2: Music on hold is selected in program [111] as follows.
• External – Uses an external music source, such as radio.
• Internal – Uses the internal music source equipped with the system.
• Tone –
*3: When an extension in the UCD group is available.
*4: The system holds the call until the assigned time in program [521] expires.
*5: OGM repeats the assigned time intervals in program [522] within the assigned time in
program [521].
*6: The other OGM (OGM2) is selected in program [502].
*7: The system treats the call according to program [523] as follows when the assigned time
in [521] expires.
• Disconnect – the call is disconnected.
• Intercept – the call is sent to the extensions programmed in [408]-[410].
*8: The system treats the call according to program [524] as follows when the assigned time
in [525] expires.
• Disconnect – the call is disconnected.
• Intercept – the call is sent to the extensions programmed in [408]-[410].
*9: If the caller did not hear an OGM, the call will not be disconnected until the caller goes
on-hook.
*10: The UCD Ring Timer After Intercept starts. The destination telephone(s) will ring for
the time programmed in program [526]. If the call is not answered during the
programmed time, the call will be disconnected.
Uses the cyclic tone equipped with the system.
U
3-63
Features