Horizon Fitness EX-59-02 Owner's Manual page 12

ASSEMBLY STEP 3
4
6
2
12
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
5
7
G
H
I
8
HARDWARE FOR STEP 3
PART TYPE
G WAVY WASHER
H FLAT WASHER
I FLAT WASHER
B SPRING WASHER
J BUTTON HEAD BOLT
Open HARDWARE FOR STEP 3.
A
Remove PRE-INSTALLED BOLTS AND
B
WASHERS (6) from MAIN FRAME (2).
Carefully pull the CONSOLE CABLE (4) through
C
B the CONSOLE MAST (5) using the twist tie
located inside the CONSOLE MAST (5).
Attach CONSOLE MAST (5) to MAIN FRAME (2)
D
using PRE-INSTALLED BOLTS AND WASHERS
(6).
J
Slide WAVY WASHER (G) and FLAT WASHER
E
(H) over CRANK (7) followed by PEDAL ARM (8)
as shown. Rest pedal arm wheel on guide rail.
Attach the PEDAL ARM (8) to the CRANK (7)
F
using 1 FLAT WASHER (I), 1 SPRING WASHER
(B) and 1 BOLT (J).
Repeat steps E–F on the opposite side of the
G
elliptical.
DESCRIPTION QTY
17.2X22.5X0.5T 2
16.0X25.0X1.0T 2
8.2X30.0X1.5T 2
8.2X15.4X2.0T 2
M8X1.25PX15L 2