Tools You Will Need - GE PCB975 Owner's Manual

PREPARE TO INSTALL THE RANGE

TOOLS YOU WILL NEED

Drill with 1/8" Bit
Adjustable Wrench
Phillips Screwdriver
Flat-blade
Screwdriver
1 PREPARE THE OPENING
See illustrations for all rough-in and spacing
dimensions.
The range must be placed with 12 mm (1/2")
minimum clearance at the back wall and side
walls of the cabinet.
Acceptable electrical
outlet area.
Orient the electrical
receptacle so the length
is parallel to the floor.
76.2 cm
(30")
Installation Instructions
Safety Glasses
Tape Measure
Pencil
Level
7.6 cm
(3")
63 cm
(25")
119.3 cm
(47")
91,4 cm
19 cm
(36")
(7
64.4 cm
(25 3 ⁄ ")
8
114 cm
(45")
MATERIALS YOU MAY NEED
Lag Bolts
(For Anti-Tip Bracket Mounted
PARTS INCLUDED
**38.2 cm
(15") Min.
*12 mm
( " )
1 ⁄
2
7.6 cm
(3")
MINIMUM DIMENSIONS BETWEEN COOKTOP,
WALLS AND ABOVE THE COOKTOP:
*** Make sure the wall covering, countertop and
cabinets around the range can withstand the
heat (up to 93.3°C [200°F]) generated by the
1 ⁄ ")
range.
2
*** Allow 76.2 cm (30") minimum clearance
between surface units and bottom of
unprotected wood or metal cabinet, and
38 cm (15") minimum between countertop
and adjacent cabinet bottom.
*** Recommended spacing to heat-sensitive
surfaces.
39
Anchor Sleeves
on Concrete Floors Only)
Anti-Tip Bracket Kit
**76.2 cm
***
(30") Min.
15.2 cm
(6")
Min.
*12 mm ( " )
1 ⁄
2