Reset All Contacts - Motorola DTR2430 User Manual

Cloning Mode: Reset All Contacts
10. Press
these are correct press
are not correct press
11. The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send-
ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated "Programming Successful". If
over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt
cloning again to any members of this list.

Reset All Contacts

This key sequence deletes all contacts in the radio. This is useful for radio programming and rental
radios.
a. Hold down
b. Press
c. Press
d. Press the Right
e. Hold down
6864242V01
under Prgm. The screen is displayed showing the Add: and To: selections. If
under Go to transmit the selection over the air. If the selections
under Back to return to the selection menu.
Press Go To
Add:Joe Smith
To:Security
Over The Air
Go
and press the PTT button three times.
.
.
and press the PTT button three times.
Back
5-3
June 22, 2006