Chapter 5 Cloning Mode; Entering Cloning Mode; Adding/Deleting A Contact - Motorola DTR2430 User Manual

Chapter 5 Cloning Mode

Entering Cloning Mode

1. Press
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down
b. Press the Left
c. Press
d. Press the Right
e. Hold down

Adding/Deleting a Contact

These menus are used to add or remove a contact from a Private contact or PrivateGroup contact
over the air. This feature is used primarily for fleet maintenance. When adding/deleting a contact to a
PrivateGroup contact, the radio attempts to contact all radios within that PrivateGroup and notifies
any radios that did not receive the update.
1. From the Clone menu scroll to select Send Contact. Press
2. Scroll to select ADD:.
to turn the source radio on.
and press the PTT button three times.
.
.
and press the PTT button three times. The Clone Menu appears.
Clone Menu
Duplicate Rad...
Remote Add C...
Remove Delet...
Select
Remote Add C...
Add:Invalid
To:Invalid
Change
Reset
under Select.
Prgm