Show Ip Routes; Show Log; Show Pppoe; Show Status - Motorola Netopia 3397GP Administrator's Handbook

Administrator's Handbook
show ip lan-discovery
Displays the LAN Host Discovery Table of hosts on the wired or wireless LAN, and whether or not they
are currently online.

show ip routes

Displays the IP routes stored in your Motorola Netopia® Gateway.
show ip state-insp
Displays whether stateful inspection is enabled on an interface or not, exposed addresses and blocked
packet statistics because of stateful inspection.
show ipmap
Displays IPMap table (NAT).

show log

Displays blocks of information from the Motorola Netopia® Gateway diagnostic log. To see the entire
log, you can repeat the show log command or you can enter show log all.
show memory [all]
all
Displays memory usage information for your Motorola Netopia® Gateway. If you include the optional
argument, your Motorola Netopia® Gateway will display a more detailed set of memory statistics.

show pppoe

Displays status information for each PPPoE socket, such as the socket state, service names, and host
ID values.
show rootcert
Dumps the Subject line for the list of all the trusted root certificates for the supplicant, which is cur-
rently a superset of the OpenSSL trusted root certificates.
show rtsp
Displays RTSP ALG session activity data.
show security-log
Displays blocks of information from the Motorola Netopia® Gateway security log.

show status

Displays the current status of a Motorola Netopia® Gateway, the device's hardware and software revi-
sion levels, a summary of errors encountered, and the length of time the Motorola Netopia® Gateway
status
has been running since it was last restarted. Identical to the command.
140