Motorola Netopia 3397GP Administrator's Handbook page 157

Netopia 2200, 3300 and 7000 series routers
Table of Contents

Advertisement

DHCP Option Filtering
Beginning with Firmware Version 7.7, support for DHCP option filtering is provided via the filterset set-
tings.
set dhcp filterset name " string " rule n
type [ dhcp-option | hw-address | requested-option ]
Specifies a DHCP filterset named string as one of three possible types:
The rule can either specify an option and option contents, dhcp-option; a client hardware address
range, hw-address; or an option the client is requesting, requested-option. For hw-address, you will
need to enter start-address and end-address values; for the others a dhcp-option parameter must
be set.
By default a rule is of type dhcp-option, for backwards compatibility.
set dhcp filterset name " string " rule n dhcp-option [ 0... 255 ]
Creates a DHCP filterset named string , for example "settopbox," with rule number n .
Up to two filtersets can be added. Your Gateway supports a single LAN DHCP server instance, but an
additional filterset is available for use when bridging, to block undesired DHCP traffic. Up to 8 rules can
be created in the filterset, which are evaluated in order.
dhcp-option determines which DHCP option should be compared. A typical value would be to use
option 60 data for comparison, but allowing this value to be configured permits more flexibility.
set dhcp filterset name "settopbox" rule 1 type dhcp-option
set dhcp filterset name " string " rule n match-action
[ pass | discard | continue ]
Assigns a match action to the filterset. If set to pass the match-pool address is shown.
set dhcp filterset name " string " rule n absent-action
[ pass | discard | continue ]
Assigns an absent action to the filterset. If set to pass the absent-pool address is shown.
set dhcp filterset name " string " rule n match-option-group " option_group *"
Assigns the option group named option_group to match.
set dhcp filterset name " string " rule n match-str " match_string *"
Assigns a match string to the filterset. The match-str string will be compared against the DHCP DIS-
COVER option data. This string can contain multiple "*" and "?" wildcard substitutions.
157

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents