Exporting A Host Public Key And Saving It To A File; Displaying A Host Public Key - HP 5920 Series Configuration Manual

Step
2. Export a local host
public key to a file.

Exporting a host public key and saving it to a file

After you export a host public, copy and paste the key to a file, and then transfer the file to the peer
device.
To export a local host public key:
Step
1. Enter system view.
2. Export a local host
public key.

Displaying a host public key

Display a host public key and copy it to an unformatted file. You must literally enter the key on the peer
device.
Perform the following tasks in any view:
Command
•
Export an RSA host public key:
In non-FIPS mode:
public-key local export rsa [ name
key-name ] { openssh | ssh1 | ssh2 }
filename
In FIPS mode:
public-key local export rsa [ name
key-name ] { openssh | ssh2 }
filename
•
Export a DSA host public key:
public-key local export dsa [ name
key-name ] { openssh | ssh2 } filename
•
Export an ECDSA host public key:
public-key local export [ name
key-name ] ecdsa { openssh | ssh2 }
filename
Command
system-view
•
Export an RSA host public key:
In non-FIPS mode:
public-key local export rsa [ name
key-name ] { openssh | ssh1 | ssh2 }
In FIPS mode:
public-key local export rsa [ name
key-name ] { openssh | ssh2 }
•
Export a DSA host public key:
public-key local export dsa [ name
key-name ] { openssh | ssh2 }
•
Export an ECDSA host public key:
public-key local export ecdsa [ name
key-name ] { openssh | ssh2 }
178
Remarks
The public-key local export ecdsa
command is available in Release
2311P04 and later versions.
Remarks
N/A
The public-key local export ecdsa
command is available in Release
2311P04 and later versions.