Functions And Operations; Auto On/Off; Speed/Distance; Calorie/Pulse (Target Heart Rate) - Reebok REV-10101 User Manual

FUNCTIONS AND OPERATIONS

· AUTO ON/OFF
The monitor will wake up automatically if the exercise machine is in motion. If stop exercising for
over 4 minutes, monitor will turn off and reset all function values to zero.
SCAN
While at "start" operation,
Press the MODE button until mark appear on the position of Scan. Monitor will display the
following function and each function will keep 5 seconds on the main screen.
Time–Speed-Distance–Calorie–Pulse.
TIME
Press the MODE button until the mark appear on the position of TIME. Monitor will display the
Time function on the main screen.
Count up:
Without setting the time value, the monitor will count up the time from 00:00~99:59.
Count down:
Setting the exercise time from 1:00~99:00 minutes, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm.
SPEED
Press the MODE button until the mark appear on the position of SPEED. Monitor will display the
current speed on the main screen. The monitor will display the current speed from 0.00 ~ 99.9
Km/hr or Mile/hr.
DISTANCE
Press the MODE button until the mark appear on the position of DISTANCE. Monitor will
accumulate the distance trip.
Count up:
Without setting the distance value, the monitor will count up the distance from 0.1~999.9Km or
Mile.
Count down:
Setting the exercise distance from 1.0~999.0 Km or Mile, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm.
CALORIE
Press the MODE button until the mark appear on the position of Calorie.
Count up:
Without setting the calorie value, the monitor will count up the calorie from 0.1~999.0.
Count down:
Setting the exercise calorie from 1.0~999.0, the monitor will count down from your setting
values. Once reach setting value, monitor will alarm.
PULSE (Target Heart Rate)
Pulse Limit:
Setting the value of pulse limit between 90 to 220, the monitor will measure your heartbeats.
Once reach setting value, monitor will produce beep sounds to remind you.
11