Manual Lighting Procedure - Comfort Glow CGF265NV Owner's Operation And Installation Manual

OPERATING
FIREPLACE
Continued
24
TO TURN OFF GAS TO APPLIANCE
Shutting Off Fireplace
Turn control knob clockwise
Shutting Off Burners Only (pilot stays lit)
Turn control knob clockwise
VARIABLE OUTPUT CONTROL OPERATION
You can set the variable output control knob to any comfort level between HI and LO.
The valve will adjust the heat output and flame height and maintain the comfort level
you select. The ideal comfort setting will vary by household depending upon the
amount of space to be heated, the output of the central heating system, etc.

MANUAL LIGHTING PROCEDURE

1. Follow steps 1 through 5 under Lighting Instructions, page 22.
2. Depress control knob and light pilot with match.
3. Keep control knob pressed in for 30 seconds after lighting pilot. After 30
seconds, release control knob. Now follow step 8, above.
to the OFF position.
Clockwise
to the PILOT position.
Clockwise
101920