Motorola SBV5220 User Manual page 35

Introduction
5
Click Properties. The Local Area Connection Properties window is displayed:
6
If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to step 10.
If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is
displayed:
7
Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol
window is displayed:
8
Click Internet Protocol (TCP/IP) in the Network Protocol section on the Select Network Protocol window.
SBV5220 VoIP Cable Modem User Guide
Installation Troubleshooting Glossary License
26