Icom IC-M603 Instruction Manual page 51

D D Scrambler type
(Appears when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler type
can be selected in Set mode depending on dealer setting.
--Set Mode--
Scrambler Scrambler Type
UT-98
˘UT-112
D D Scrambler code
(Appears when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler
code can be set depending on dealer setting.
When the UT-112 is installed, 32 codes (1 to 32) can be se-
lected.
When the UT-98 is installed, 128 codes (0 to 127) can be se-
lected.
When UT-112 is installed
--Set Mode-- Mode--
Scrambler Code Scrambler
4
≤
3
2
˘1
<CLR˘Exit / ENT˘OK> OK>
(Default: 1)
(Default: UT-112)
When UT-98 is installed
--Set Mode--
Scrambler Code Scrambler
3
≤
2
1
˘0
<CLR˘Exit / ENT˘OK> <CLR
(Default: 0)
D D Favorite channel
This item sets the Favorite channel function ON or OFF.
The favorite channel is programmed by the TAG channel set-
ting (p. 15).
ON : [Y Y ]/[Z Z ] keys on the microphone select the favorite
channels in the selected channel group in sequence
when pushed.
OFF : [Y Y ]/[Z Z ] keys on the microphone select all channels in
the selected channel group in sequence when pushed.
--Set Mode--
Favorite CH
˘ON
OFF
8
SET MODE
(Default: ON)
8
45