Wall Mounting - AT&T 1187 User Manual

91-5783-10-00_ATT1487_R0.qxd
Getting Started

Wall mounting

The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
6/2/2003 12:14 PM
Connect short line cord and AC adapter as
shown on page 6, then grasp and squeeze to
open hinged wall mount.
Press and slide down firmly so base is
held securely on outlet mounting pegs.
Remove handset cradle tab, rotate and replace to
hold handset securely in place when wall mounted.
8
Page 8
Swivel wall mount down
and lock in place.
Plug short line cord
into telephone jack.
Rotate
antenna
fully upright
for best
results.