Ddns Configuration Example 2 - HP 5920 Series Configuration Manual

[Switch-ddns-policy-3322.org] interval 0 0 15
[Switch-ddns-policy-3322.org] quit
# Specify the IP address of the DNS server as 1.1.1.1.
[Switch] dns server 1.1.1.1
# Apply DDNS policy 3322.org to VLAN-interface 2 to enable DDNS update and dynamically update
the mapping between domain name whatever.3322.org and the primary IP address of VLAN-interface
2.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ddns apply policy 3322.org fqdn whatever.3322.org
After the preceding configuration is completed, Switch notifies the DNS server of its new domain
name-to-IP address mapping through the DDNS server provided by www.3322.org, whenever the IP
address of Switch changes. Therefore, Switch can always provide Web service at whatever.3322.org.

DDNS configuration example 2

Network requirements
As shown in
Switch acquires the IP address through DHCP. Through the PeanutHull server, Switch informs the DNS
server of the latest mapping between its domain name and IP address. The IP address of the DNS server
is 1.1.1.1. Switch uses the DNS server to translate www.oray.cn into the corresponding IP address.
Figure 47 Network diagram
Configuration procedure
Before configuring DDNS on Switch, register with username steven and password nevets at
http://www.oray.cn/, add Switch's host name-to-IP address mapping to the DNS server, and make sure
the devices can reach each other.
# Create a DDNS policy named oray.cn and enter its view.
<Switch> system-view
[Switch] ddns policy oray.cn
# Specify for DDNS update requests the URL address with the login ID steven and password nevets.
[Switch-ddns-policy-oray.cn] url oray://steven:nevets@phservice2.oray.net
Figure 47, Switch is a Web server with domain name whatever.gicp.cn.
98