HP ENVY Maintenance And Service Manual page 87

Table of Contents

Advertisement

a.
Position the display assembly with access to the top edge.
b.
Lift the webcam/microphone module enough to gain access to the connector (1). (The module is
attached to the display enclosure with double-sided tape.)
c.
Disconnect the cable (2) from the module.
The webcam is available using spare part number 812714-001.
3.
To remove the display panel:
a.
Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the enclosure.
Component replacement procedures
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents