HP ENVY Maintenance And Service Manual page 83

b. Remove the display hinges (3).
5. To remove the wireless antenna cables and transceivers, peel the transceivers from the enclosure (1),
release the wireless antenna cables from the clips or tape (2) that secure the cables to the display
enclosure, and then remove the antenna cables and transceivers (3).
The antennas are available using spare part number 812669-001.
6. If replacing the display cover, be sure that the subcomponents (including the webcam/microphone
module, the antenna receivers, and all associated cables and hardware) are transferred to the new cover.
Reverse this procedure to install the display assembly.
Component replacement procedures 75