Cleaning And Care - Remington HyperFlex XR1330 Use And Care Manual

CLEANING & CARE
The shaver is a washable appliance. The head and body may
be cleaned under warm water.
NOTE: **When cleaning your shaver, make sure the shaver is
turned off and disconnected from the charging stand.**
CAUTION!
When cleaning the external surfaces of the shaver, do not use strong
detergents or other chemicals.
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair
dryer or heater to dry the shaver.
NOTE: **The shaver head and neck assembly is designed to be
detachable from the shaver body. Simply pull upwards from the
neck of the shaver for easy release. To reattach neck, align it with
the neck attachment cavity so that it clips back into position.**
1
1. Head & cutter (hair pocket) assembly
2. Detachment grooves
3. Neck assembly
4. Neck attachment cavity
Daily:
1. Locate the detachment grooves on the head & cutter assembly. Gently pull to
detach the hair pocket from the neck assembly. (Diagram L)
2. Tap out excess hair shavings.
3. Rinse the head of the shaver in running water.
4. Gently reattach the hair pocket to the neck assembly until it locks in place on all
three sides. The hair pocket may be reattached in any configuration.
2
3
8
4