Remington HYPERFLEX XR1370 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
HYPERFLEX
When using an electrical appliance, basic precautions should always be observed,
including the following. Please read all instructions before using this shaver.
XR1370
WARNINGS
To reduce the risk of burns, fire, electric shock, or injury to persons:
• When connecting the charging unit to a power source outside of the USA or
Canada, use a plug adapter suitable for the power outlet. This device has a charg-
ing adapter that will work with worldwide 100V-240V power outlets.
• Only use the power adapter provided with this device.
• Do not reach for the appliance if it has fallen into water while plugged into the
power source. Unplug from the power source at the wall immediately.
• Shaver may be rinsed under water or used in the shower, but never use the
charging unit in the shower.
• Detach the shaver and charging unit from the power source before cleaning.
• Except when charging, always unplug this appliance immediately after using.
• When recharging place in a safe position, out of the reach of children and pets.
• Close supervision is necessary when this appliance is used by, on, or near children
or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended or provided by the supplier.
• Never operate this appliance if the electrical cord is frayed or the plug is damaged.
Use and Care Guide
• Keep the electrical cord away from heated surfaces.
• Never drop or insert objects into any of the appliance's openings.
Register Your New Product Today!
• This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products are being used, or
By registering your new Remington ® product, you will receive these important benefits:
where oxygen is being administered.
Proof of Ownership Product Protection Product Registration Special Offers
Register online at: www.RemingtonProducts.com
Dry Shaving
Cleaning and Care
• Dry shaving is a fast and low mess way to shave.
• Press the power button to turn the shaver on.
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
• Place the shaver cutting head against your skin with all three cutters touching
your skin.
• Your HyperFlex shaver is built to be watertight. This makes clean up fast and easy
as it is safe to rinse the shaver body and head under running water.
• Pressing lightly against your skin, move the shaver head in slow, small
circular motions.
• Do not use strong detergents or chemicals to clean your shaver. Water alone or
• Hairs on your face and neck may grow in different directions. Moving your shaver with mild anti-bacterial soap is recommended.
against the direction of hair growth will be most effective.
• Do not place your shaver in the dishwasher.
• You may use your free hand to gently stretch your skin tight which can aid in mak-
ing hairs stand up to more easily enter the cutting slots.
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
button to activate the trimmer. Place the trimmer blade parallel with your skin and
use downward strokes to cut.
C D
• Refer to the cleaning instructions to keep your shaver cutting at peak performance.
F G
J K
Daily Cleaning
1. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose
the hair pocket where shaven hair particles are collected.
2. Tap out excess shavings in the sink or waste basket. (E)
3. Rinse both the cutter face and hair pocket under warm running water to rinse
clean.
4. Snap the cutter face back onto the shaver.
Weekly Cleaning
1. A more thorough cleaning of the cutters on a weekly basis will add to the life
and performance of your shaver.
• Always attach the plug to the appliance, then to the wall outlet. To disconnect, turn
all controls to OFF, then remove plug from outlet.
• Always pull on the plug body to unplug the appliance from the wall socket. Never
pull on the electrical cord.
• Do not plug in or unplug this appliance when your hands are wet.
• Do not use extension cords or a voltage converter with this appliance.
• To prevent breaking the power cord, do not wrap it around the appliance.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable power cords from the appliance during storage.
• Do not use this shaver if the cutting head surfaces are damaged or broken as
facial injury could occur.
• This shaver and trimmer are intended for use on facial hair only. It should not be
used for longer hair on your head or body.
SAVE THESE INSTRUCTIONS
2. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose the
hair pocket where shaven hair particles are collected.
3. Tap out excess shavings in the sink or wastebasket. (E)
4. Release the blue inner cutter support by sliding it out of the snap lock. Note the
small triangle at the center of the blue support. With your fingertip, slide the blue
support back to release the snap. (F) (G)
5. Remove the inner cutters from the individual cutting heads. (H) Note that the hubs
of the cutters are color coded to match the color of the outer cutters. The cutters
should be mated with their matching color for best performance and life.
6. Thoroughly rinse away any small debris from both the inner and outer cutters
and hair pocket.(I)
7. Replace the inner cutters. Remember to match the color coded hubs. (J)
8. Replace the blue inner cutter support. Be sure it securely snaps back in under
the small triangle at the center of the cutting head. (K)
9. The cutter assemblies may be lubricated with a single drop of household oil.
E 10. Snap the cutter face back onto the cutting head base.
Product Disposal
When your rechargeable shaver reaches the end of its useful life, the LiFePO 4
H I
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
by law, you may elect to dispose of the shaver with the batteries.
CAUTION! Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1. Unplug the shaver
2. Run shaver until the motor stops
3. Remove the head from the shaver (Pull head up and off)
4. Using a small screwdriver, pry the 'collar' off of the top of the handle
5. Using a small screwdriver, pry the front cover from the body
6. Remove three screws located on front of shaver
7. Using a small screw driver, pry up the newly unsecured inner housing to expose
the battery
8. Pry battery free from circuit board
9. Dispose of battery properly
Product Features Performance Features
Hyperflex Cutting head
1
• Cutting head pivots and flexes to comfortably follow the contour of your face.
6
4
Dual Track Cutters
• Three rotary cutters with two cutting tracks for fast efficient shaves.
Lithium Battery
• Durable, long lasting power supply. Up to 3X longer life than standard
rechargeable cells.
60 minute run time
• Weeks of daily shaving on a single charge.
90 minute charge time
• Fast delivery of a full battery charge.
Waterproof
• Use dry or with shaving gel. Safe to use shaver in the shower for added comfort.
2
• Fast, simple cleaning under the faucet.
Worldwide voltage
7
• Provided charging adapter works with 100V to 240V power source.
Folding charge stand
• Rotate open to hold shaver while charging. Collapses down around shaver for
3
travel or storage.
Travel Lock Feature
5
The shaver has an electronic travel lock feature intended to prevent the
shaver from turning on and discharging accidently while packed in your
luggage.
SHAVER PARTS
• To set the travel lock on: Depress and hold the on switch for 3 seconds. The
1. Hyperflex cutting head 4. Pop-up detail trimmer
shaver will turn on, and then will shut off after 3 seconds. The LED display will
2. Power on/off button 5. Charging pins
flash five times to indicate the lock is set.
3. Battery Indicator display 6. Charging Stand
• While the travel lock is set, if the on switch is pressed, the LED display will flash
7. Charging adapter
three times to indicate the shaver is in the travel lock mode.
• To turn the travel lock off: Depress and hold the on switch for 3 seconds. The
Use with gel or foam in
LED display will flash three times while the button is being held and then the
the shower for ultimate comfort.
shaver will turn on.
Product Registration Warranty
By registering your new Remington product you will receive these important benefits: Limited Two-Year Warranty
®
• Proof of ownership
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
• Product protection
purchase. This warranty does not include damage to the product resulting from
• Product registration
accident or misuse. If the product should become defective within the warranty
• Special offers
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to: Remington Returns Center,
Register online at: RemingtonProducts.com
507 Stokely Dr., P.O. Box 1, Deforest, WI 53532 . For more information call
800-736-4648 in the US or 800-268-0425 in Canada.
Shaver Replacement Parts
Warranty excludes:
■ Heads and cutters
To keep your HyperFlex shaver working at peak performance, it is recommended
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
that you replace the cutting head after every 12-18 months of use. Indication that
PURPOSES.
your shaver may need to have the cutting head replaced would be if you notice an
increase in irritation of your skin after you shave or you feel hair pulling due to dull
This warranty does not cover products damaged by the following:
cutting blades.
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
The replacement cutting head for your shaver is model number SPR-XR
■ Use with unauthorized accessories
Shaver Accessories
■ Connecting it to incorrect current and voltage
Remington also offers these additional attachments that fit
■ Wrapping cord around appliance causing premature wear & breakage
your HyperFlex shaver. These attachments easily snap on
■ Any other conditions beyond our control
and off interchangeably with your shaving head.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
Groomer attachment with adjustable length settings: SPR-XT
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
• If you like to wear a beard, goatee, or stubble look, the groomer head will trim your
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
facial hair to adjustable lengths between .5 mm and 5 mm.
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
Facial Brush attachment: SPR-XFB
• The facial brush attachment is used for deep cleaning and exfoliating for healthy
This warranty gives you specific legal rights and you may also have other rights
facial skin. Two brush types are available.
which vary from state to state or province to province. Some states do not allow
SPR-XFM Massage Brush
the exclusion or limitation of incidental, special or consequential damages.
SPR-XFN Cleansing Brush
How to Order Parts and Accessories
Two easy ways to order spare parts and accessories are available.
• Order by Phone:
U.S. Residents: 1-800-392-6544
Canadian Residents: 1-800-268-0425
• Order Online:
RemingtonProducts.com
Charging Shaving Technique
Charging Process Your Hyperflex shaver may be used either dry or wet with shaving cream or gel.
We recommend that you use the shaver in the shower for optimal performance.
1. Plug the power cord adapter into the charging stand.
Unfold the charging stand into the open position. Plug the cord
Wet Shaving
into the port at the side of the charging stand. The plug has a
custom shape to match the charge stand and prevent use with A • Wet shaving will provide a very comfortable and close shave. The shaver is safe to
use in the shower or can be rinsed under running water at the sink.
incorrect adapters. (A)
2. Plug the adapter into the wall outlet. • Wet your face and neck area with water.
Place the stand on a flat surface and where it cannot be accidently
• Apply shave gel or foam to your face.
bumped into standing water such as a sink or bathtub.
• Press the power button to turn the shaver on. Rinse the cutting head under
3. Place the shaver into the charge stand.
running water.
Position the shaver body so the charging pins of the shaver B
mate with the charging strips in the charge stand. (B) Note
• Place the shaver cutting head against your skin with all three cutters touching
the LED battery display will indicate that the battery is actively charging as
your skin.
noted in the LED indicator section of this manual.
• Pressing lightly against your skin, move the shaver head in slow, small
4. Use the shaver until a recharge is required.
circular motions.
Do not leave the charger plugged in so that you are recharging the shaver after
every use. This will shorten the life of the battery. To use the charge stand to
• Hairs on your face and neck may grow in different directions. Moving your shaver
hold the shaver on your counter between uses, simply unplug the adapter cord against the direction of hair growth will be most effective.
from the charge stand and store it away until a recharge is needed.
• You may use your free hand to gently stretch your skin tight which can aid in mak-
Quick Charge Feature ing hairs stand up to more easily enter the cutting slots.
• The shaver does not need to be fully charged to function. The quick charge allows
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
you to place the shaver on charge for 5 minutes and will deliver up to 5 minutes
button to activate the trimmer. Place the trimmer blade parallel with your skin and
of use – approximately one or two shaves.
use downward strokes to cut.
• When finished, rinse your face and check for any hairs that may have been missed
Digital Battery Indicators
for quick touch up.
• When using your shaver with foams or gels it is important to rinse the cutting head
LED lights display the battery charge level. The shaver has 14 red LED
clean after each use. This will avoid having the gels dry in the cutting head and
lights shaped in numerical digits.
clogging the shaver. Refer to the cleaning instructions to keep your shaver cutting
• Full Charge: When fully charged, the LED numbers will show "60". This indicates the at peak performance.
shaver has 60 minutes of run time available. After each use the numbers will display
how many minutes of run time are left for 5 seconds after the shaver is turned off.
• Low Charge: When the shaver has 3 minutes of run time remaining the number
display will show flashing "Lo". This indicates the shaver needs to be recharged
• Charging: When placed in the plugged in charge stand, single red LED lights will
flash sequentially in a clockwise direction around the perimeter of the display. This
indicates the shaver is taking a charge. At full charge all the LED lights will flash
"60" to indicate the battery is fully charged.
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington branded product,
®
you are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men's Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington branded Men's Shave and
®
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers' returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington ® branded Men's Shave and
Groom product:
a. The Remington product;
®
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in
4. Returns should be mailed prepaid (no collect returns accepted) to:
Canada. Or visit RemingtonProducts.com
Remington 60-Day MBG
507 Stokely Drive, Box 1
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
DeForest, WI 53532
Dist. by: Spectrum Brands Canada, Inc.,
5. Refund does not include postage costs for the return of the product, but will 131 Saramia Crescent, Vaughan, ON L4K 4P7
include applicable taxes paid by customer, if any.
® Registered Trademark and TM Trademark of Spectrum Brands, Inc.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
© 2015 Spectrum Brands, Inc. 9/15 13083-00
product.
7. Please allow 4-6 weeks to receive your refund by check. Made in China
T22-0003854
Contains a Listed Adaptor