HP P2000 G3 Cli Reference Manual page 473

Table 74 snapshots properties (continued)
Name Type
shareddata string
shareddata- string
numeric
priority-value string
user_priority- string
value
snapshot-type string
Description
Amount of preserved and write data that is shared between this snapshot and
other snapshots.
Unformatted shareddata value in 512-byte blocks.
Retention priority for the snapshot, based on the snapshot attributes and the
user-defined retention priority for the snapshot type.
• 0x2000: Queued snapshot. The snapshot was taken for remote replication
but is queued, waiting for a previous replication to complete.
• 0x4000: Replication snapshot.
• 0x6000: Standard snapshot.
• 0x8000: Common sync point. The latest snapshot that is copy-complete on
all secondary volumes.
• 0xa000: Volume-copy snapshot. Snapshot that is being used to copy data
from a source volume to a destination volume.
• 0xc000: Replicating snapshot. Snapshot that is being replicated from a
primary system to a secondary system.
• 0xe000: Only sync point. The snapshot is the only sync point that is
available on any secondary volume.
User-defined retention priority for the snapshot type.
Snapshot type.
• Standard snapshot: Snapshot of a master volume that consumes a
snapshot license.
• Standard snapshot(DRM): A temporary standard snapshot created
from a replication snapshot for the purpose of doing a test failover for
disaster recovery management (DRM).
• Replication snapshot: For a primary or secondary volume, a
snapshot that was created by a replication operation but is not a sync point.
• Replication snapshot(Replicating): For a primary volume, a
snapshot that is being replicated to a secondary system.
• Replication snapshot(Current sync point): For a primary or
secondary volume, the latest snapshot that is copy-complete on any
secondary system in the replication set.
• Replication snapshot(Common sync point): For a primary or
secondary volume, the latest snapshot that is copy-complete on all
secondary systems in the replication set.
• Replication snapshot(Old Common sync point): For a primary
or secondary volume, a common sync point that has been superseded by a
new common sync point.
• Replication snapshot(Only sync point): For a primary or
secondary volume, the only snapshot that is copy-complete on any
secondary system in the replication set.
• Replication snapshot(Queued): For a primary volume, a snapshot
associated with a replication operation that is waiting for a previous
replication operation to complete.
• Replication snapshot(Awaiting replicate): For a primary
volume, a snapshot that is waiting to be replicated to a secondary system.
HP P2000 G3 MSA System CLI Reference Guide 473