HP P2000 G3 Cli Reference Manual page 185

Example Change parameters for a TakeSnapshot-type task named Snap:
# set task snapshot-prefix VD1v1 retention-count 2 Snap
Success: Command completed successfully. (Snap) - The task was
modified.(2012-01-21 12:37:49)
Change parameters for a VolumeCopy-type task named Copy:
# set task dest-vdisk VD3 dest-prefix VD1v1 modified-snapshot no Copy
Success: Command completed successfully. (Copy) - The task was
modified.(2012-01-21 12:37:52)
Change parameters for a ReplicateVolume-type task named Replicate:
# set task snapshot-prefix VD1v2 replication-mode last-snapshot Replicate
Success: Command completed successfully. (Replicate) - The task was
modified.(2012-01-21 12:37:57)
• create task
See also
• delete task
• set schedule
• show schedule-details
• show schedules
• show task-details
• show tasks
HP P2000 G3 MSA System CLI Reference Guide 185