HP P2000 G3 Cli Reference Manual page 122

Reset the SMI-S configuration on both Storage Controllers:
# reset smis-configuration both
WARNING: The configuration of the SMIS service will be reset to default
settings. Any hosts registered via SMIS will need to be registered again. Are
you sure? yes
Info: SMIS service configuration has been reset for local controller.
(2013-01-10 16:56:41)
Info: SMIS service configuration has been reset for partner controller.
(2013-01-10 16:56:41)
Success: Command completed successfully. (2013-01-10 16:56:41)
See also • restore defaults
122 Alphabetical list of commands