HP P2000 G3 Cli Reference Manual page 149

Example Set the system to send an email from RAIDsystem@mydomain.com to both
sysadmin@mydomain.com and JSmith@domain2.com when a non-Informational event occurs,
and to send an email with attached logs to logcollector@mydomain.com when logs need to
be transferred:
# set email-parameters server 10.1.1.10 sender RAIDsystem domain mydomain.com
notification-level warn include-logs enabled email-list
sysadmin@mydomain.com,JSmith@domain2.com,,logcollector@mydomain.com
Info: Set Email Address 1 to: sysadmin@mydomain.com (sysadmin@mydomain.com)
Info: Set Email Address 2 to: JSmith@domain2.com (sysadmin@mydomain.com)
Info: Set Email Address 3 to:
Info: Set Email Address 4 to: logcollector@mydomain.com
(logcollector@mydomain.com)
Info: Set Email Server Name to: 10.1.1.10 (10.1.1.10)
Info: Set Email Domain Name to: mydomain.com (mydomain.com)
Info: Set Email Notification Level to: warn (mydomain.com)
Info: Set Email Sender Name to: RAIDsystem (RAIDsystem)
Info: Set Email Include Logs: enabled (enabled)
Success: Command completed successfully. (2012-01-21 15:07:46)
See also • show email-parameters
• test
HP P2000 G3 MSA System CLI Reference Guide 149