14
WHEELS, TIRES
–
Clean the thread of the wheel spindle and screw
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Position wheel speed sensor
Guideline
Screw, wheel speed sensor
holder
–
Mount and tighten screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
–
Take the motorcycle off of the front wheel stand. (
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.
M00463-10
–
Tighten screws
Guideline
Screw, fork stub
Finishing work
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
.
in the drill hole. Mount and tighten screw
M6
.
.
.
M8
20 Nm
(14.8 lbf ft)
9 Nm
Loctite
(6.6 lbf ft)
p. 80)
M8
15 Nm
(11.1 lbf ft)
p. 80)
p. 78)
115
.
®
243™