Headset; Multi Media Card (Mmc) / Secure Device (Sd) Card - Motorola MC50 User Manual

3 - 2 MC50 with Windows Mobile 5.0 User Guide

Headset

Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony applications.
To connect the headset, remove the plug from the headset jack at the top of the mobile computer and insert the
headset connector. Contact a Motorola representative for compatible headsets.
Headset Connection
Figure 3-1

Multi Media Card (MMC) / Secure Device (SD) Card

The MMC/SD card slot provides secondary non-volatile storage. The slot is located at the top of the mobile
computer (see Figure
A variety of third-party cards can be used in the mobile computer for storage, Bluetooth connection,
Voice-over-IP, and other functions. Refer to the documentation provided with the card for more information,
and follow the manufacturer's recommendations for use.
NOTE SD cards are inter-operable with MMC cards; both can be used in MC50 mobile computers.
Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD precautions include, but
CAUTION
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
To insert the MMC/SD:
Power off the mobile computer.
1.
Remove the card cover at the top of the mobile computer by removing the screw and lifting the cover out of
2.
the slot.
If a card is already installed, press the card in to release it, then remove it.
3.
Insert the new card with the card contacts aligning with the contacts in the MMC/SD housing, until you feel
4.
a click.
3-2).