Imager Scanning - Motorola MC50 User Manual

Correct
Linear Scanner Aiming Pattern
Figure 2-12

Imager Scanning

Ensure that a scan enabled application is loaded on the mobile computer.
1.
Aim the scan exit window at the bar code.
2.
Imager Scanning
Figure 2-13
Press the scan button.
3.
Place the bar code in any orientation within the aiming pattern. Ensure the entire symbol is within the
4.
rectangular area formed by the brackets in the aiming pattern. The red laser aiming pattern turns on to
assist in aiming. LED 1 lights red to indicate that scanning is in process. LED 1 lights green and a beep
sounds, by default, to indicate the bar code was decoded successfully.
Linear bar code
View Finder
(Aiming Pattern)
Correct
Imager Aiming Pattern: Bar Code Centered
Figure 2-14
Correct
Imager Aiming Pattern: Bar Code Not Centered
Figure 2-15
Incorrect
PDF417 symbol
Symbol
Incorrect
Operating the MC50 2 - 17