Receiving Information - Motorola MC50 User Manual

2 - 22 MC50 with Windows Mobile 5.0 User Guide

Receiving Information

To receive information, align the mobile computer's IR ports so that they are unobstructed and within close
range. When information is sent from the other mobile computer, the mobile computer (if configured) receives
it automatically.
In order to receive information automatically, tap
1.
window appears.
Beam Window
Figure 2-23
Select the
2. Receive all incoming beams
incoming infrared (IR) beams and prompts you to accept them.
Receiving Beam Data Acknowledgement
Figure 2-24
To disable detection of beams, deselect the
3.
NOTE If an older mobile computer attempts to send an IR beam, the receiving mobile computer may not be
prompted to accept it. In this case, before the beam is sent from the older mobile computer, tap Receive
an infrared beam at the bottom of the Beam window.
>
Start Settings
check box to receive beams. By default the mobile computer detects
Receive all incoming beams
> tab > icon. The
Connection Beam
check box.
Beam