with BMW Motorrad Integral
ABS II
OE
Remove screw 1 and take ABS
sensor out of hole.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Mounting front wheel stand
(
110).
Remove axle clamping screw 2.
Remove quick-release axle 3
while supporting wheel.
Roll front wheel forward to re-
move.
Remove spacing bushing 4 on
left side from front wheel hub.
Installing front wheel
Malfunctions may occur
during control interventions
by ABS and ASC if a wheel other
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
chassis control systems ABS
and ASC at the beginning of this
chapter.
8
107
z