Threaded fasteners not
8
tightened to the specified
torque can work loose or their
108
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
z
Mount spacing bushing 4 on
left side in wheel hub.
The front wheel must be
installed right way round to
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
Roll front wheel into front
wheel guide.
Lift front wheel and install
quick-release axle 3 with
appropriate torque.
Quick-release axle in axle
mount
37 lb/ft (50 Nm)
Tighten axle clamping screw 2
with appropriate torque.
Clamping screw (quick-
release axle) in slider
tube
14 lb/ft (19 Nm)
with BMW Motorrad Integral
OE
ABS II
Insert ABS sensor into hole
and install screw 1.
Remove front wheel stand.
Ease brake calipers onto brake
disks.