Table of Contents
Advertisement
Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To protect the glass of the
new bulb from soiling, only
handle it with a clean, dry cloth.
Install bulb 2 by turning clock-
wise in light housing.
Insert inside end of lens into
light housing and close.
Install screw 1.
Diode rear light
If more LEDs have burned out in
the tail light than are indicated in
the Technical Data below, the tail
light bulb must be replaced. In
this case:
Contact a specialized work-
shop, preferably an authorized
BMW Motorrad retailer.
Maximum number of de-
fective LEDs in taillight
1 (Brake / taillight)
8
115
z
Advertisement
Table of Contents
