Table of Contents
Advertisement
Lamps
8
Replacing low-beam and
high-beam bulbs
112
The alignment of the
connector, the spring
strap and the bulb may differ
from that shown in the following
illustrations.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
z
Turn counterclockwise to re-
move the cover for the high
beam 1 or the cover for the
low beam 2.
Disconnect plug 3.
Remove spring strap 4 from
detent and fold to side.
Remove bulb 5.
Replace defective bulb.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To protect the glass of the
new bulb from soiling, only
touch it on the base.
Insert bulb 5 while ensuring
correct position of lug 6.
Advertisement
Table of Contents
