Troubleshooting Method; Lcd Status Message List - Oki OKIPAGE 10i Maintenance Manual

4.3

Troubleshooting Method

When a problem occurs, go through the troubleshooting according to the following procedure.
Problem occurs
4.3.1

LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided in
Table 4-1.
Classification
Jam error
(feeding)
Jam error
(ejection)
Paper size error
Tray paper out
Paper size
request
Problem displayed by
the LCD message
LCD Status Message
TRAY2
FEED JAM
TRAY2
EXIT JAM
TRAY2
SIZE ERROR
TRAY2
PAPEROUT
TRAY2
OOOREQUEST
OOO : Papre size
(A4, Letter, Legal, etc.)
Troubleshooting
according to the LCD
Status Message List
(see 4.3.1)
Table 4-1
Description
Notifies of occurrence of • Check the paper in the High Capacity
jam while the paper is
being fed from High
Capacity Second Paper
Feeder.
• When the problem occurs frequently,
Notifies of occurrence of • Check the paper in the printer. Carry
jam while the paper is
being ejected from the
printer.
Notifies of incorrect size • Check the paper in the High Capacity
paper feeding from High
Capacity Second Paper
Feeder.
Notifies of no paper state • Load the paper in High Capacity
of the High Capacity
Second Paper feeder.
Notifies of correct paper • Load the requested size paper in the
size for the High capacity
Second Paper Feeder.
188
Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.1)
Recovery method
Second Paper Feeder.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off.
go through the Troubleshooting.
out the recovery printing by opening
and closing the cover, and turn the
error display off.
Second Paper Feeder.
Also check to see if there was a
feeding of multiple sheets.
Carry out the recovery printing by
opening and closing the cover, and
turn the error display off.
Second Paper Feeder.
High Capacity Second Paper Feeder.