Paper Feed Jam - Oki OKIPAGE 10i Maintenance Manual

[JAM error]
2-2

Paper feed jam

• Does the paper feed jam occur when the power is turned on?
• Yes
• Yes Remove the paper.
• No
• No Replace the paper sensor plate.
• Yes
• No Has the paper reached the paper sensor plate?
• No
• No Replace the one-way clutch gear of the hopping roller assembly.
• Yes
• No Set the image drum cartridge properly.
• Yes
• Yes Has the paper reached the outlet sensor plate?
• Yes
• No Replace the outlet sensor plate.
• Yes
• No Is the main/drum motor rotating?
• No
• No Connect DM connector properly.
• Yes
• No Replace the main/drum motor.
• Yes
• Yes Is the transfer roller rotating?
2-2-a
Is the paper on the paper sensor plate?
Is the operation of the paper sensor plate normal (moves freely when it is touched)?
Replace the power supply/sensor board.
Is the registration roller rotating?
Is the image drum cartridge being set properly?
Check the hopping roller assembly or tray.
Is the operation of the outlet sensor plate normal (moves freely when it is touched)?
Clean the outlet sensor on the power supply/sensor board or replace the power supply/
sensor board.
Is DM connector on the main control board being connected properly?
Is the coil resistance (normal resistance: both between Pins l and 2, as well as Pins 3
and 4 are about 2.9Ω) of the main/drum motor correct ?
Replace the main control board.
104