Upper Cover Assy - Oki OKIPAGE 10i Maintenance Manual

3.3.1

Upper Cover Assy

(1) With the power switch turned off, unplug the AC power cord from the outlet.
(2) Disconnect the interface cable 1.
(3) Press the knobs 2 on left and right sides and open the stacker cover assy 3.
(4) Take out the image drum unit 4.
(5) Remove two screws 5, and open the manual feed guide assy 6. Lift the front side of the upper
cover 7 up and unlock the latches at two locations on the back side. Lift and remove the upper cover
assy 7.
Notes : 1.
2.
When removing or reinstalling the upper cover, be careful not to get the motor cables
tangled or caught.
When reinstalling the screws 5, be sure to direct the screws into preexisting threads.
7
1
2
3
51
5
2
6
4