Oki OKIPAGE 10i Maintenance Manual page 203

c) Q-Server
The Q-Server is an application to process the print data.
The Q-Server of this system supports multiple file serves. Furthermore, it allows connection of
multiple print servers for one file server.
Item
Connection method
Number of connected file
servers
Number of connected queues
Registered file server name
Registered queue name
Registered print server name
Support F/S version
Polling intervals
Connection retry
Factory default Setup range
Bindery method
1 to 4 servers
1 to 64 queues
Null character Maximum
string servers *
48 characters
Null character Maximum
string queues *
48 characters
OKIDATA [t 1 to 48 charac-
hree
ters
least significant bytes
]
for MAC address
2.2C, 3.1X
4.0, 4.1
5 sec. 1 to 60 sec.
3 times 1 to 10 times
203
Description
Indicates the connection method with the file
server. This method use the bindery for
communication with the file server.
Indicates the number of file servers which can
be connected simultaneously. Each file serv-
er need not be started in advance. Even when
the printer is ready for operation, connection is
achieved only by starting the file server.
Indicates the number of queues which can be
connected simultaneously. Each queue is
connected after having been registered to the
file server to be connected.
four Indicates the name of the connected file
server. Each file server name can be regis-
Maximum
tered up to a maximum of 48 characters.
84 Indicates the name of the connected queue.
Each queue name can be registered up to a
Maximum
maximum of 48 characters.
Indicates the printer server name. Each file
server uses the registered file server name.
A separate print server name cannot be
specified for each file server.
Indicates the file server version. Connection
of 2.15C and 2.2 is not confirmed.
Indicates the time of job search intervals for
each queue in idle time.
Indicates the number of retries in the event of
connection error.