Vertex Standard VXR-9000E Operating Manual page 3

The VXR-9000E is commercial-grade 25-watt FM repeater designed to provide reliable two-way full-duplex
communications over a wide range of environmental conditions.
Designed to mount in a standard 19-inch rack, the VXR-9000E is crafted using the latest computer-aided design
and manufacturing processes, to ensure a high level of reliability to users. Important channel frequency data is
stored in EEPROM, and is easily programmable by a Servicing Technician or Dealer using an IBM compatible
personal computer and the FIF-10A (or FIF-12) + CT-104A USB Programming Interface and CE60 Software.
Please take a few minutes to read this manual carefully. The information presented here will allow you to derive
maximum performance from your VXR-9000E. After reading it, keep this manual handy for quick reference, in
case questions arise later on.
Important Note: Internal service work, programming, and accessory installations should only be performed
by your authorized Vertex Standard Dealer. Dangerous conditions and/or possibly illegal operation may result
from improper setup, programming, or internal modifications.
The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with
a separation distance of at least 74 cm from all persons during normal operation and must not exceed
an antenna gain of 0 dBd. This device must be restricted to work related operations in an Occupational/
Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. The
antenna(s) used with this device must satisfy the antenna co-location requirements of 47 C.F.R. 1.1307(b)(3).
 Do not modify this repeater for any reason.
Refer service of this repeater to qualified technicians only.
 When the repeater become abnormal, such as the overheating, smoke smell of burning, etc., turn the
main power switch off and disconnect the Main Power Source connector from the rear of the VXR-
9000E immediately. Also disconnect any backup power source you may have connected to the rear of
the VXR-9000E.
 Do not place any combustible material near the repeater.
 Do not spray any liquid over the repeater.
 Ensure that the power and antenna connections are securely made, using cables with excess capacity for
the power being utilized.
VXR-9000E FM R
S /W
afety
O
EpEatER pERating
i
aRning nfoRMation
n !
otice
M
anual
Introduction
1