Silencer - BMW R 1200 RT Rider's Manual

See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Seat the rear wheel on the
rear-wheel adapter.
Install wheel studs 1 and
tighten to specified torque.
Rear wheel to wheel
flange
Tightening sequence: tighten
in diagonally opposite se-
quence
60 Nm
Securing silencer ( 138).

Silencer

Swinging silencer out
CAUTION
Hot exhaust system.
Risk of burn injury
Do not touch a hot exhaust
system.
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Allow the silencer to cool.
Remove screws 1 with
washer 2 on front screw.
7
137
z