9
184
Install wheel studs 1 and
tighten to specified torque.
Rear wheel on wheel
flange
z
Tightening sequence: Tighten
in a crosswise pattern
60 Nm
Install the silencer (
Silencer
Removing silencer
CAUTION
Hot exhaust system
Risk of burn injury
Do not touch a hot exhaust
system.
Allow rear silencer to cool
down.
Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxili-
ary stand; BMW Motorrad re-
commends the BMW Motorrad
rear-wheel stand.
Install the rear-wheel stand
185).
(
168).
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Remove the bolt 1 from the
cover 2.
Remove the bolt 3 from the
clamp 4.
OE
Remove the bolt 3 and
washer 2.