BMW R 1200 RT Rider's Manual page 144

7
142
Connect plug 1.
z
Insert cover 1 and turn it clock-
wise to install.
Replacing bulb for high-
beam headlight
NOTICE
The description below steps you
through the procedure for repla-
cing the left bulb. The procedure
for working on the right side is
the same.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screws 2.
Ease speaker cover 1 to the
left to remove.
Remove screws 1.
Carefully remove speaker
unit 2, noting the plug.
Disconnect plug 1.