7
140
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten securing screw 1.
z
ATTENTION
Centre stand retracts if mo-
torcycle lifted too high.
Risk of damage to parts if vehicle
topples.
When raising the vehicle, make
sure that the centre stand re-
mains on the ground.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
Lighting
Replacing bulb for low-
beam headlight
NOTICE
The positions of the plug, the
spring wire retainer and the
bulb might not be as illustrated
below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.