BMW R 1200 RT Rider's Manual page 163

Pull the release lever all the
way up and open the lid of the
case.
Closing cases
Pull release lever 2 all the way
up.
Close the lid of the case and
press it down. Check that
nothing is trapped between the
lid and the case.
NOTICE
The cases can also be locked
by turning the lock to the LOCK
position. In this case, ensure that
the vehicle key is not left in the
cases.
Push release lever 2 down until
it engages.
Turn the key in the case lock
to the LOCK position and re-
move the key from the lock.
Removing cases
Turn the key to the RELEASE
position in the case lock.
The handle pops out.
Pull carry handle 3 up as far as
it will go.
The case is released and can
be removed.
Install cases
Pull the handle up as far as it
will go.
8
161
z