BMW R 1200 RT Rider's Manual page 90

then signals the reason for the
4
alarm for one minute.
The meanings of the flash codes
88
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorised key
Flashes 4x: Disconnection of
the DWA anti-theft alarm from
the motorcycle's battery
Flashes 5x: Motion sensor 3
z
Deactivation without
remote control or radio-
operated key
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm (DWA) is deac-
tivated.
To deactivate the motion
sensor (for example if you
are about to transport the
motorcycle on a train and
the swaying movement
of the moving train could
trip the alarm), call up the
Settings
menu before
switching off the ignition.
Vehicle Alarm
Select -
syst. Sensor
- .
Off (once)
Select
switch off the motion sensor
this once.
Switch off the ignition.
Activation takes 30 seconds to
complete.
Turn indicators flash three
times.
Confirmation tone sounds three
times (if programmed).
The anti-theft alarm (DWA) is
active, the motion sensor is
deactivated.
Deactivation with remote
control or radio-operated
key
to
Press button 2 on the remote
control or the radio-operated
key once.