Vent /Intake Terminations For Installation Of Multiple Direct Vent Furnaces - Goodman AKSS9/GKS9 Installation Instructions Manual

V /I T
ENT NTAKE ERMINATIONS
D V F
IRECT ENT URNACES
If more than one direct vent furnace is to be installed vertically through
a common roof top, maintain the same minimum clearances between
the exhaust vent and air intake terminations of adjacent units as with
the exhaust vent and air intake terminations of a single unit.
If more than one direct vent furnace is to be installed horizontally through
a common side wall, maintain the clearances as in the following fig-
ure. Always terminate all exhaust vent outlets at the same elevation
and always terminate all air intakes at the same elevation.
F I M
OR NSTALLATION OF ULTIPLE
FRONT COVER
DRAIN PORT
RED HOSE
CLAMP
HOSE A
HOSE B
SIDE PANEL
GROMMET
HOLES
TUBES 2
DRAIN TRAP
Horizontal Connections - Right Side Down
FRONT
COVER
PRESSURE
TAP
LEFT SIDE
FRONT COVER
PANEL
DRAIN PORT
RED HOSE CLAMP
Horizontal Connections - Left Side Down
OPTIONAL
INTAKE
SCREENS
Termination of Multiple Direct Vent Furnaces
FRONT
COVER
PRESSURE
TAP
RUBBER ELBOW
GREEN
DRAIN PORT
HOSE
TUBE 1
SILVER HOSE
CLAMP
(3 PLACES)
DRAFT BLOWER
DRAIN TRAP
SIDE PANEL
GROMMET
HOLES
19
3" - 24"
12" MIN SEPARATION
3" MIN
12" MIN TO GRADE OR HIGHEST
ANTICIPATED SNOW LEVEL
RUBBER
ELBOW
RIGHT
SIDE
PANEL
CLAMP
INDUCED
DRAIN PORT
HOSE B
HOSE A
GREEN HOSE
CLAMPS
(3 PLACES)
TUBE(S) 2