Oki MB760dnfax User Manual page 41

-
For the UK
When you enter the IP address or DNS name of
this equipment in the [Address] box, the correct
PPD file is automatically selected in the [Print
Using] box. If the correct PPD is not automatically
selected, select [Select a driver to use] and
choose the PPD file displayed in the list.
4
Click [Add].
The [Installable Options] window appears.
5
Set the following options.
•
Model Selection
— Choose this for using your model.
•
Finisher
Not Installed — Select this if a finisher is
not installed.
Inner Finisher (Tray 1) — Select this
when the Inner Finisher is installed.
Note
•
Even if you choose [Not Installed] for the Finisher
option during print settings, the finisher options such
as stapling can be selected. If you select the finisher
options for printing but the finisher is not installed,
finisher settings will be ignored and printing will be
performed correctly.
•
Trays
Tray 1
Select this when the tray 1 is installed.
Tray 1 & Tray 2
Select this when the tray 1 and 2 are
installed.
Tray 1, 2 & Tray 3
Select this when the tray 1, 2 and 3 are
installed.
Tray 1, 2 & Tray 3, 4
Select this when the tray 1, 2, 3 and 4 are
installed.
Tray 1 & LCF
Select this when the tray 1 and LCF are
installed.
Tray 1, 2 & LCF
Select this when the tray 1, 2 and LCF are
installed.
6
Click [OK].
The printer is added to the Printer List.
■ Configuring IPP printing
When you want to setup IPP print queue in the
Mac OS X, follow the procedures below.
1
Open System Preferences and click
[Print & Scan].
2
Click [+].
3
Click [IP] and specify the items as
described below.
- 41 -
Installing Additional Tray Units
1
2
3
4
5
6