Turning Power ON
•
Turning Power ON
Power switch is OFF
1
Connect the power supply cord.
(1)
Check that the power switch has
been turned OFF (O).
1
2
(2)
Connect the power supply cord to
the machine.
3
4
(3)
Insert the power supply plug into
the outlet.
5
2
Turn ON the power switch.
(1)
Check that there are no
documents in the scanner part.
(2)
Check that there are no
documents in the document tray
6
of the automatic document feed.
(3)
Turn ON the power switch (I).
Power switch is ON
1
Check that there is no document on
the glass.
2
Check that there is no document in
the document tray for the automatic
document feeder.
3
Press the [POWER] button until the
[Main Power] lamp turns ON.
- 50 -
FC