Connecting With The Wireless Lan Station Mode - Sony PXW-X200 Operating Instructions Manual

3
Set "Wi-Fi Func. Mode" in "Network"
(page 109) of the OTHERS menu to
"Access Point."
The "AP" indication appears on the LCD
monitor/EVF screen.
4
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
5
Connect the device to the camcorder by
selecting the camcorder's SSID from
the SSID list in "Wi-Fi Network" and
inputting the password on the device.
For the SSID and password of the camcorder,
check "SSID&Key" in "Network" (page
109) of the OTHERS menu.
Note
The operation method differs depending on the
device.
6
Start the browser on the device, then
access "http://192.168.1.1:8080/
index.html."
The screen for inputting "User Name" and
"Password" appears.
For the user name and password of the access
authentication, check "User Name" and
"Password" in "Network" (page 109) of the
OTHERS menu.
7
Input the user name and password, then
select "OK."
58 Connecting to Other Device via Wireless LAN
Connecting with the Wireless LAN
Station Mode
The camcorder connects to an existing access
point of the wireless LAN as a client. The
camcorder and device connect via the access
point.
Smartphone/
tablet
Access
point
Connecting to the access point with the
WPS function
If the access point is compatible with the WPS
function, you can connect to the access point with
simple settings. If the access point is not
compatible with the WPS function, see "To
connect to the access point in the station mode
without the WPS function" (page 64).
1
Turn the access point on.
2
Turn the camcorder on.
3
Set "Wi-Fi&Proxy/USB" in "Network"
(page 109) of the OTHERS menu to
"Wi-Fi&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
Computer