Prefix/Suffix Values; Scan Data Transmission Format - Motorola Symbol LS1203 Product Reference Manual

4 - 8 Symbol LS1203 Product Reference Guide

Prefix/Suffix Values

A prefix and/or suffix can be appended to scan data for use in data editing.
To set a value for a prefix or suffix:
Change the scan data format by scanning the appropriate
1.
Scan the appropriate prefix/suffix bar code on
2.
Scan a four-digit number (i.e., four bar codes from
3.
value.
NOTE When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the
3-digit decimal value. See
To correct an error or change a selection, scan Cancel on
4.
Scan Prefix

Scan Data Transmission Format

To change the scan data format, scan Scan Options and one of the following four bar codes corresponding to the
desired format:
•
Data As Is
•
<DATA> <SUFFIX>
•
<PREFIX> <DATA>
•
<PREFIX> <DATA> <SUFFIX>.
Scan Enter on page 4-9
on page 4-8. Scan Data Format Cancel on
If a carriage return/enter is required after each scanned bar code, scan the following bar codes in order:
Scan Options
1.
<DATA> <SUFFIX>
2.
Enter (on page
3.
Table E-1 on page E-1
to complete the change. To set values for the prefix and/or suffix, see
page 4-9
4-9).
Scan Data Transmission Format on page
page 4-8.
Appendix D, Numeric Bar
for the four-digit codes.
page D-3.
Scan Suffix
to cancel the change.
4-8.
Codes) that corresponds to that
Prefix/Suffix Values