Table of Contents
Advertisement
Check the appliance is electrically safe and gas sound when you have finished.
Checking the Parts:
4 pan supports
ArtNo.255-0012 -
110DF - Elise pan supports
4 flat shelves
Roasting tin & trivet
Allen Keys
ArtNo.020-0024 -
Tools V2
INSTALLATION
Wok cradle
ArtNo.000-0009 Wok ring, cast
Handyrack
ArtNo.324-0003 Handyrack
Plinth
ArtNo.350-0008 - 90 SC plinth
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders' merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Allen keys (supplied)
10.
Adjustable spanner
11.
Screws for fitting stability bracket
12.
13 mm spanner or socket wrench
23
Advertisement
Table of Contents
