Cleaning The Filter - Morphy Richards Scoot bagless vacuum cleaner Instructions Manual

Cleaning the
filter
Everytime the dust container is emptied
the filter should be cleaned. Pull the tabs at
the side of the mesh filter cover to remove
the pleated filter cover. Use the brush
attached to the rear of the filter to brush the
fine dust from between the filter pleats. Dust
can also be removed by rigorously shaking
the filter. Refit the mesh filter cover and re-
install the filter into the cleaner.
The filter should also be washed regularly
in warm water, but do not use detergent.
Allow to dry naturally and ensure it is totally
dry before replacing it.
An additional filter (not filter cover or
brush) is provided allowing continued use
while one filter is washed and dried.
When changing the filters over ensure the
filter cover is fitted to the filter that is being
placed in the machine. The brush can also
be attached to the new filter.
Note: A protection device maintains the
air-flow to the motor if the filters become
blocked.
When this operates the sound of the
cleaner will increase slightly. If this happens,
clean the filter and clear any blockage, the
sound of the cleaner will then return to
normal.
WARNING: Never use the appliance
without the filters installed, otherwise
damage to the product may occur which
would not be covered by the guarantee.
7