Emptying The Dust Container - Morphy Richards Scoot bagless vacuum cleaner Instructions Manual

Emptying the dust container

IMPORTANT: To obtain best results from
your cleaner it is important to empty the dust
container and clean the filters regularly,
otherwise the airflow and suction power will
be reduced. If the dust container is not full
and performance deteriorates, first check if
there are any blockages in the accessories
or tubes. If these are clear, it is necessary to
empty the dust container and clean the filter.
Step 1
Remove the hose by pressing in the clips
and pulling the hose away from the hose
inlet.
Step 2
Slide back the dust container release
button ¤ and lift off the dust container using
the folding handle.
Step 3
Holding the dust container over a
dustbin, grip the tabs on the back of the
filter, pull to remove and empty out the dust.
3 CLEAN THE FILTER before replacing, see
page 7.
4 Replace the clean filter, making sure that
it is correctly fitted, then replace the dust
container. Press down firmly until it clicks
into position.
IMPORTANT: Do not operate your cleaner
without the filters fitted.
6