Front View - IBM eServer 135 xSeries User Reference Manual

Front view

Power control
button
Power-on
light (green)
Reset
button
CD activity
light (green)
Power control button: Press this button to manually turn the server on or off.
Power-on light: This green LED lights and stays on when you turn on your server
and blinks when the server is in standby mode.
Reset button: Press this button to reset the server and run the power-on self-test
(POST). You might need to use a pen or the end of a straightened paper clip to press
the button.
Select button/indicator: The green LED on this button lights when the monitor,
keyboard, and mouse are logically connected to this server.
System error light:This amber LED lights when a system error occurs.
Diskette drive activity light: When this LED is on, it indicates that the diskette drive
is in use. Push this button to release a diskette from the drive.
Hard disk drive status light: Each of the hot-swap drives has a hard disk drive status
light. When this amber LED is on continuously, the drive has failed.
Hard disk drive activity light: Each of the hot-swap drives has a hard disk activity
light. When this green LED is flashing, the controller is accessing the drive.
CD-eject button: Push this button to release a CD from the drive.
CD-ROM drive activity light: When this light is on, it indicates that the CD-ROM
drive is in use.
Select
button/indicator
(green)
Diskette drive
System error
activity light
light (amber)
(green)
Diskette eject
button
CD eject button
Chapter 1. Introducing the xSeries 135 appliance server
Hard disk drive
status light (amber)
Hard disk drive
activity light (green)
5